Specifications

NTI EXTENDEX Extenders
2
MATERIALS
Materials Included with this kit:
9 NTI XTENDEX ST-C5CMPDA or ST-C5CMPSA Local Unit
9 NTI XTENDEX ST-C5CMPDA or ST-C5CMPSA Remote Unit
9 2- 120VAC or 240VAC at 50 or 60Hz-9VDC/1.0A AC Adapters
9 This owner's manual
Additional materials may need to be ordered, depending upon the configuration:
¾ CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.
10 for proper EIA/TIA 568 B wiring method)
Note: CAT5/5e/6 shielded twisted-pair cable(s) must be used to meet CE emission and immunity requirements.
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US & Canada
or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com
and we will be happy to be of assistance.
Cables needed
Audio and Video cables with RCA connectors will be required for connecting the HDTV and audio devices to the XTENDEX Local
and Remote Units.
Purpose Cable needed
Video for ST-C5CMPDA-600 and ST-C5CMPSA-600 75 ohm coax cable with 3 RCA connectors on each end
(red,green,blue)
Audio for ST-C5CMPDA-600 Coax cable for digital audio
Audio for ST-C5CMPSA-600 Standard stereo audio cable with RCA connectors