Specifications

NTI EXTENDEX Extenders
7
2. Connect 75 ohm RCA cables between the local HDTV and the RCA connectors marked "Y", "Pb", and "Pr" on the local unit
as shown in Fig. 2.
3. Connect coax cable for digital audio (ST-C5CMPDA-600 only) or stereo audio cable (ST-C5CMPSA-600 only) between the
audio connection(s) and the audio device. See Fig. 2.
(Note- Connecting devices to the Local Unit is optional. A local HDTV and audio device is not required for the Remote
Unit to work)
Figure 2- Connect the local television and audio device to the Local Unit
Connect The CAT5 Cable
Connect the CAT5 cable to the “Cat 5” port on the Local Unit. (See Fig. 3.) When properly inserted the cable end should
snap into place.
Note: If an RJ45 wall outlet is being used, connect
the other end of the extension cable to the RJ45 wall
outlet.
WARNING: Never connect the XTENDEX
to an Ethernet card, Ethernet router, hub or switch or
other Ethernet RJ45 connector of an Ethernet device.
Damage to devices connected to the Ethernet may
result.
Figure 3- Connect CAT5 cable to Local Unit
!