XTENDEX® Series ST-C5CMPDA-600 ST-C5CMPSA-600 EXTENDERS Installation and Operation Manual ST-C5CMPDA-600 HD Video/Digital Audio Extender MAN079 Rev Date 4/11/2012
TRADEMARK XTENDEX is a registered trademark of Network Technologies Inc in the U.S. and other countries. COPYRIGHT Copyright © 2005, 2012 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.
TABLE OF CONTENTS Introduction...................................................................................................................................................................... 1 Materials .......................................................................................................................................................................... 2 Features and Functions............................................................................................................
NTI EXTENDEX Extenders INTRODUCTION The XTENDEX Series ST-C5CMPDA-600 CAT5 Extender (XTENDEX) is designed to connect and extend the signals from one high-definition (HD) video and digital (coax / SPDIF) audio source to two high-definition televisions (HDTV) and digital audio devices, one of each local and one of each remote. Possible digital video and audio sources include a DVD player, cable television box, home entertainment system, etc..
NTI EXTENDEX Extenders MATERIALS Materials Included with this kit: 9 9 9 9 NTI XTENDEX ST-C5CMPDA or ST-C5CMPSA Local Unit NTI XTENDEX ST-C5CMPDA or ST-C5CMPSA Remote Unit 2- 120VAC or 240VAC at 50 or 60Hz-9VDC/1.0A AC Adapters This owner's manual Additional materials may need to be ordered, depending upon the configuration: ¾ CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.
NTI EXTENDEX Extenders FEATURES AND FUNCTIONS 1a. Orange RCA jack- for connection of local digital (coax / SPDIF) audio device's "audio in" 1b. Red RCA jack- for connection of local right line level stereo audio device 1c. White RCA jack- for connection of left local line level stereo audio device 2. Green RCA jack- for connection of "Y" component lead from local HD television 3. Blue RCA jack- for connection of "Pb" component lead from local HD television 4.
NTI EXTENDEX Extenders 5. Cat 5- RJ45 female- for connecting the CAT 5 cable 6. Yellow LED- traffic indicator- illuminates when there is traffic between the local and remote units 7. Green LED- power indicator- illuminates when power has been supplied to the unit 8. 9VDC- 1.0A- connection jack for the AC adapter 9.
NTI EXTENDEX Extenders LIMITATIONS • The audio output of the XTENDEX is compatible with self-powered stereo speakers. Otherwise, connect the audio outputs to an audio receiver. PREPARATION FOR INSTALLATION • Locations should be chosen for the HDTV and speakers that also have space to connect the Remote and Local Units within the distance provided by the cables. • The CAT5 cables must be run to the locations where the Remote and Local Units will be connected.
NTI EXTENDEX Extenders INSTALLATION Installing The Local Unit 1. Plug the cables of the Local Unit into the audio/video source. (See Fig. 1) as per the chart below.
NTI EXTENDEX Extenders 2. Connect 75 ohm RCA cables between the local HDTV and the RCA connectors marked "Y", "Pb", and "Pr" on the local unit as shown in Fig. 2. 3. Connect coax cable for digital audio (ST-C5CMPDA-600 only) or stereo audio cable (ST-C5CMPSA-600 only) between the audio connection(s) and the audio device. See Fig. 2. (Note- Connecting devices to the Local Unit is optional.
NTI EXTENDEX Extenders Installing The Remote Unit 1. Position the Remote Unit such that the CAT5 cable, the HD television cable, the speakers, and the AC adapter power connector can each reach the Remote Unit without putting strain on the cables. 2. Connect 75 ohm RCA cables between the remote HDTV and the RCA connectors marked "Y", "Pb", and "Pr" on the Remote Unit as shown in Fig. 2. 3.
NTI EXTENDEX Extenders Plug-in and Power Up 1. Plug the power cords from the HD television, audio/video source, and speakers (if applicable) into power outlets if this has not already been done. 2. Connect each AC adapter power connector to the 9VDC ports on the Remote and Local Units Plug each AC adapter into a power outlet. The green LED on the RJ45 connector of both the Remote and Local Units should illuminate, indicating that a proper power connection has been made to them. (See Fig. 6.
NTI EXTENDEX Extenders TECHNICAL SPECIFICATIONS Video Compatibility Connectors Video Maximum I/O Levels Input / Output Impedance Maximum Resolutions HDTV Component- Y,Pb, Pr RCA 1.
NTI EXTENDEX Extenders TROUBLESHOOTING Each and every piece of every product produced by Network Technologies Inc is 100% tested to exacting specifications. We make every effort to insure trouble-free installation and operation of our products. If problems are experienced while installing this product, please look over the troubleshooting chart below to see if perhaps we can answer any questions that arise.
