digital basics TM 2-in-1 air keyboard ® HQ ® works with Apple , Mac/PC & Android QUICK START GUIDE
Package contents: 1x 2-in-1 Air Exec Keyboard HQ 1x Micro USB charging cable * DOES NOT INCLUDE Apple iPad® Safety instructions Congratulations on your purchase of this keyboard. To get the most from your product, please take a few minutes to read these instructions. • Always follow basic safety precautions 1. Care and maintenance instructions Use only a dry soft cloth to wipe the product. Never allow water or any other liquids to get inside the product while cleaning.
Charging It is critically important to make sure both your iPad and keyboard are fully charged before use. To charge your Keyboard; ® 1. Locate the micro USB slot that is on the (right) side of the keyboard (parallel to the power switch). 2. Use the included micro USB cable and plug it into a powered USB hub, USB port on your computer or any USB power adapter (not included) 3. While the keyboard is being charged, the LED indicator light will be illuminated with a RED color.
Connecting your keyboard with your iPad® for the first time Note: This keyboard is designed with shortcut keys (the keys that have blue color writing / icons) that are only optimized for the Apple iOS iPad operating system). This keyboard will operate on other Bluetooth enabled devices however the aforementioned shortcut keys will not function according to the table outlined below in this manual as this keyboard is designed for use with Apple mobile devices. ® ® ® ® 1.
How to reset pairing If your iPad displays “Connection Unsuccessful”, make certain the Bluetooth keyboard is powered on and in range (within approximately 30 feet) of the iPad . If after checking the above and it will still not pair, simply delete the profile by selecting the “Keyboard HQ” , then select “Delete This Device” and repeat the pairing process again.
Keyboard shortcuts IOS, ANDROID, WINDOWS THREE-IN-ONE SYSTEM. 1. Click on “Settings” on your device, and turn on Bluetooth® connection. 2. You will be prompted to add a device to the Bluetooth® connection; select the Bluetooth® Keyboard. ® 3. Turn on the Bluetooth Keyboard, you will see the blue light blinking quickly. To sync your device to the Bluetooth® Keyboard, press Fn+C for 2 to 3 seconds. 4. Your device will show “BT Keyboard”, select it to begin pairing. 5.
Specifications Bluetooth Operating Distance - 26-30 feet Working time: Over 40 hours Stanby time: Around 6 months Charging time: 2-3 hours Weight: 1.5 lbs Dimensions: 11/4” c 6.3” x 0.63” ® Sleeping Mode If they keybpard has not been used in 10 minutes, the device will go into sleeping mode. To use the keyboard again, press any key, and wait for 3 seconds to reconnect. This device complies with Part 15 of the FCC Rules.
Support If you are having problems with your product, please contact customer support before contacting your retailer. Digital Gadgets 866-843-6460 Digital Gadgets Limited Warranty Statement Digital Gadgets warrants this product against defects in workmanship and material for a period of 12 months from the original date of purchase.
To obtain warranty service, please contact Digital Gadgets for specific instructions at the telephone number below. Dated, documented proof of the original purchase is required. Digital Gadgets customer service representatives are available by calling 866-843-6460 Apple and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. ® ® Bluetooth is a registered trademark of Bluetooth SIG Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG Inc..
digital basics TM
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
