User guide

LIVEMIX MIX-16/32
3
1 2 3 4 5 6 7 8
MIX-16
7
FRONT
463
LIVEMIX DATA
IN
24VDC
3.75A
LIVEMIX DATA
OUT 1
LIVEMIX DATA
OUT 2 (MIX-32 ONLY)
MIX-16MIX-16/32
1289 5
REAR
1 2 3 4 5 6 7 8
MIX-32
9 10 11 12 13 14 15 16
7
FRONT
463
24VDC
3.75A
MIX-16MIX-16/32
LIVEMIX DATA
IN
LIVEMIX DATA
OUT 1
LIVEMIX DATA
OUT 2 (MIX-32 ONLY)
1289 5
REAR
ANATOMY OF THE MIX-16/MIX-32*
1. EXTERNAL POWER SUPPLY CONNECTOR: Connect the included power supply here. Only use
the power supply that is supplied with your MIX-16 or MIX-32. The MIX-16 is supplied with a 24V
/ 3.75A power supply. The MIX-32 is supplied with a 24V / 5A power supply. Contact support for
a replacement power supply if necessary.
2. LIVEMIX DATA IN: If using an analog input source and the AD-24, connect a shielded CAT5e or
CAT6 cable from the Livemix Data Out port on the AD-24 to the Livemix Data In on the MIX-16/
MIX-32. This will be unused if using the LM-DANTE-EXP Dante Option Card.
3. POWER SWITCH: This switch turns power on/off. The MIX-16/MIX-32 supplies power to
connected Livemix personal mixers.
CONTENTS OF BOX
• MIX-16/MIX-32
• External Power Supply
• AC Power Cable
• System Quick Start
• Registration Card
INTRODUCTION
The MIX-16/MIX-32 is the Livemix central mixer and power distributor. The MIX-16/MIX-32 provides:
• 24-channel digital input
• 24-bit digital mixing and processing
• Power and audio distribution to attached personal mixers over a single network cable
• 16 discrete monitor mixes with the MIX-16
• 32 discrete monitor mixes with the MIX-32
* MIX-16 pictured