User guide

LIVEMIX MIX-16/32

LIVEMIX

DATA IN

24VDC

3.75A

LIVEMIX

DATA OUT

STEREO MIXES 1-16

LIVEMIX

DATA OUT

MIX-16

STEREO MIXES 17-32 (MIX-32 ONLY)

1 2 3 4 5 6 7 8

MIX-16

3 6 7 4

1289 5

FRONT

REAR

Anatomy of the MIX-16

1. External Power Supply Connector: Connect the included power supply to this jack. Only

use the power supply that is supplied with your MIX-16 (24V / 3.75A). Contact support for a

replacement power supply.

2. Livemix Data In: This is the input for the MIX-16. Connect a shielded CAT5 cable from the

Livemix Data Out port on the AD-24 to the Livemix Data In. This will be unused if using the Dante

Option Card.

3. Power Switch: This switch turns power on/off to the MIX-16 unit. The MIX-16 supplies power

to connected Control Surfaces. Turning the power on/off will also power on/off all connected

Control Surfaces.

CONTENTS OF BOX

• MIX-16

• External Power Supply

INTRODUCTION

The MIX-16 is the Central Mixer of the Livemix system. Although the Control Surfaces are where

most of the mixing is controlled, the actual mixing happens in the MIX-16. The MIX-16 contains the

following features:

• 24-channel digital input

• 24-bit digital mixing and processing

• Provides power and audio to attached control surfaces over a single cable

• Provides 16 separate monitor mixes

• USB Connection to Windows PC or Apple OS X computer