User guide
LIVEMIX CS-DUO
46
MANUALLY ASSIGN DANTE CHANNELS
Livemix provides the ability to import the rst 24 channels from a connected Dante device, however
you may want to manually subscribe to channels on a Dante network. The Dante Channel Setup
allows you to connect to multiple devices or to change the routing of connected devices. An
example of this would be: connecting Dante transmitter channel 24 from a console to channel 4 on
the Livemix personal monitor system.
1. From the Global Conguration screen, PRESS
Digital Conguration.
2. You will be prompted with a warning.
PRESS Continue.
3. PRESS Dante Channel Setup to enter Dante
setup conguration.
4. SELECT a Channel to assign to a Dante channel.
A pop-up will appear on the bottom.
5. Select a Device by rotating the ADJUST knob.
PRESS the ADJUST knob to accept a selected
device. If you have previously assigned a device
to this channel, the selector may be on Channel
Select. If so, PRESS the ADJUST knob to change
to the Device Selector.
6. Select a Channel on the selected device by
rotating the ADJUST knob. After a few seconds,
the channel will be automatically selected.
7. Repeat steps 5-7 as necessary. Press Slots 13-24
to access additional channels.
8. PRESS Accept Assignments to accept the
assigned channels.
DEVICE/CHANNEL VIEW TOGGLE
The Show Device/Show Channels button toggles between the Device view and the Channel view. By
default, the names of the assigned channels are visible. PRESS Show Devices to see which devices
are assigned to each Livemix channel. PRESS Show Channels to toggle to the Show Devices view.