User guide

LIVEMIX CS-DUO
39
PUSH GROUPS
PRESS Push Groups to send your current group settings to the remote mixer.
PUSH SAVED MIX
PRESS Push Saved Mix to send a saved mix from your personal mixer to the remote mixer. Available
saved mixes will become visible. This is helpful to send a starter mix to the remote mixer (i.e. Drums,
Vocals, Leader, Keyboard, etc.). PRESS Push Selected Personal Mix to send the mix.
INTERCOM FUNCTIONALITY IN MIRRORMIX
The Intercom functions differently in MirrorMix mode. When any mix is being auditioned or has been
selected for MirrorMixing, pressing the Intercom button will communicate directly to the remote
mix user ONLY. Use the intercom to verify the mix is working for them. If the remote user uses the
Intercom while being MirrorMixed, the Intercom functions normally and broadcasts to the entire
Livemix system.
MIRROR-MIXING A REMOTE MIXER
PRESS the long MirrorMix button at the bottom of the
MirrorMix Function’s screen. The Channel Overview of
the remote mixer is now visible.
To exit MirrorMix, PRESS X or SELECT Exit MirrorMix
from Mix Tools.
The mix name and port number are referenced in the
Status Bar.
WHAT ELSE CAN I DO WITH MIRRORMIX?
MirrorMix remote mixing opens up tremendous possibilities for the Livemix system.
Front of House engineers can help performers craft better mixes.
Front of House engineers can load a mix remotely and then setup the ME group, allowing the
stage musicians to focus more on the performance and audience.
Studio engineers can customize mixes for studio performers, giving them the perfect cue mix.
Use Livemix as a full monitor desk replacement. With MirrorMix, monitor engineers can hear
exactly what stage performers hear. Intercom directly to customize mixes as needed.
Use Livemix to mix oor wedges.
Remotely enable Mute Master Output on remote mixers that aren’t being used on the stage or
in the studio.
NOTE:
While a mix can be pushed to a remote
personal mixer, the mix needs to be
saved on the remote personal mixer. On
the other hand, a remote user’s settings
can be saved to your mixer when
MirrorMixing.
NOTE:
When using MirrorMix to adjust another mix, the Ambient Mics, Intercom and Aux Input (when
not in Shared Mode) are local to your mixer, not the remote mixer. Changes to the LCD brightness
will impact your mixer and not the remote mixer.