User guide
LIVEMIX CS-DUO
35
SAVING & LOADING A PERSONAL MIX
Saving a mix makes not only saves you time setting up
for your next performance, but it also helps identify your
personal mixer for use with MirroMix and SoftRoute. Save
and load several versions of your personal mixes to one of
24 internal save slots or up to 24 save slots on an external
USB device.
TO SAVE A PERSONAL MIX:
1. SELECT Mix Tools from the Channel Overview.
2. PRESS Load/Save Personal Mix.
3. SELECT a slot to save your mix. PRESS Slots 13-24 to
access additional save mix slots.
4. PRESS Save Selected Personal Mix.
5. PRESS Yes to conrm.
6. ENTER a name for the mix. Each mix name can contain
12 characters. Name the mix as descriptive as possible
since other users may mix on the same personal mixer.
7. PRESS Done.
8. PRESS X to return to Channel Overview.
To save a mix to a USB device, insert a USB ash drive
into the slot on the personal mixer. When the device is
recognized, the USB Storage button will appear on the
Load/Save screen. SELECT the USB Storage button and
follow steps 3-8 above.
TO PERFORM A QUICK SAVE
To quickly save changes to a mix without going to the naming screen:
1. PRESS Mix Tools from the Channel Overview
2. LONG PRESS the Load / Save Personal Mix button for 2 seconds.
NOTE:
Personal mixes store Channel
Volume/Pan, Groups, Aux Input
Settings and Master Output
Settings (Stereo/Mono Mode,
EQ/HPF/Compressor & Reverb,
Volume & Peak Limiter, Mute
Master Output). If changes are
made, an asterisk (*) will appear
by the mix name on Load/Save
Personal Mix button, in Mix Tools.