User guide

LIVEMIX CS-DUO

HIGH PASS FILTER (HPF)

A high-pass lter lets the high-frequencies pass

through your mix unaffected, but lters away the low

frequencies. This is a useful with monitors that have

too high a bass-response.

Applying a 80Hz to 120Hz High Pass Filter to oor

monitors will help clean up your mix.

SELECT one of the four HPF settings that sounds best

to you.

3. OFF: High-Pass lter bypassed.

4. 40Hz: Only the very lowest frequencies, 40Hz or lower, will be ltered out.

5. 80Hz: A larger amount of lower frequencies, 80Hz or lower, will be ltered out.

6. 120Hz: The largest amount of lowest frequencies, everything from 120Hz or lower, will be

ltered out.

MASTER DYNAMICS

Dynamics are the amount of difference, or the

dynamic range, between the softest sound you hear

in your mix and the loudest. To even out the dynamics

in a mix, a tool called a compressor is used.

SELECT the type of compression you want.

• OFF: Compressor bypassed.

• LIGHT/MEDIUM/HEAVY: Differing amounts

of compression will be applied to the dynamic

range of your mix. Try each setting and see which

one sounds best.

ROTATE the ADJUST knob to adjust the amount of compression applied to the mix.