User guide

LIVEMIX CS-DUO
25
CHANNEL HIGH PASS FILTER (HPF)
The High Pass Filter allows you to roll off some of the
low frequencies that can lead to muddy sounding
mixes. As the name implies, it lets the highs “pass
through” and reduces the amount of low frequencies.
Most channels that do not contribute to the low end
of the mix, should use a HPF.
To access the High Pass Filter, PRESS HPF Settings
from the Channel EQ screen.
PRESS one of the ve HPF frequency choices:
OFF: HPF bypassed.
40Hz: 40Hz or lower will be ltered out. This
setting is good for most instruments.
80Hz: 80Hz or lower will be ltered out. This
setting will cut out some 60Hz hum and noise,
good for male vocals.
150Hz: 150Hz or lower will be ltered out. This
is another good setting for cutting hum. It is also
good for many stringed instruments.
250Hz: 250Hz or lower will be ltered out. This
is a good setting for higher pitched instruments
and female vocals.
NOTE:
The Channel EQ and HPF Settings share a page
tab. When on the Channel EQ page, the HPF
Settings tab will be visible. When on the HPF
Settings page, the Channel EQ tab will be visible.