User guide
LIVEMIX CS-DUO
16
AUX INPUT
This is the signal from any audio source feeding the ⅛” Aux In connector located on the front
panel of the personal mixer. You can adjust the volume of the Aux In from the Accessory Channel
screen. In addition to the standard volume and pan options, the Aux Input has two other functions
accessible via the Single Channel View. They can be accessed with a LONG PRESS on the channel.
SHARE AUX
The Share Aux button allows you to share your Auxiliary Input with other personal mixers in the
system. When Share Aux is not selected, your Aux Input will be local to your personal mixer. This is
useful for a local click track or rehearsing.
When Share Aux is selected, the audio on your
Auxiliary Input is available to anyone who has
selected Monitor All Aux. Use this for rehearsing or
performing with the band. Verify Monitor All Aux is
selected and adjust Aux Input volume.
NOTE: When using the LM-MICPRE, the Share Aux
will be unavailable as the Aux In port is used for the
Intercom channel. The volume will control non-local
Aux Inputs that have been shared.
MONITOR ALL AUX
The Monitor All Aux button allows you to hear other
Auxiliary inputs that are being shared. Leave this unselected if you do not want to hear other
Auxiliary inputs.
• ALWAYS ON: The intercom microphone is
always on and passing audio to the Intercom
Channel of other personal mixers.
• LATCH: Press the Intercom Button to activate
the intercom. Press the Intercom Button again
to deactivate the intercom.
• PUSH TO TALK (default operation): Press
and hold the intercom button to activate the
intercom. Release the Intercom Button to
deactivate the intercom.
FOOT PEDAL OPERATION
The optional FP-2 foot pedal can be congured to
work in intercom mode. In intercom mode, button 1
activates the intercom and functions the same as the Intercom Button. Button 2 adjusts the volume
of the ME GROUP. A short press increases volume and a long press decreases volume.
NOTE: When the LM-MICPRE button is turned on, the built-in intercom mics will be deactivated.
Any input into the Aux-In port will be routed to the Intercom Channel. The Aux-In Channel will
control the volume from non-local auxiliary sources. The Ambient mics are unaffected.