User`s manual

Description of controls is as follows:

Slot Freq (1-16): Specifies frequency in Hertz which is to be isolated from the input audio by

each of the 16 slots. Minimum Slot Freq is 1 Hz, while maximum Slot Freq

depends upon the System Bandwidth setting. Set Slot Freq to Out (scroll box

in full left position) if the slot is not desired. Slot Freq is adjustable in 1 Hz

steps.

Slot Width (1-16): Specifies width in Hertz for each of the 16 slots. Minimum and maximum Slot

Widths and adjustment resolution depend upon the System Bandwidth setting.

Build Button: Causes the FIR filter coefficients for the Multiple Slot filter to be calculated and

downloaded to the external processor for implementation. While this is

occurring, an "hourglass" mouse cursor will appear.

NOTE: You must click the Build button after any Slot Freq or Slot Width is

changed in order for the change to take effect. You must also click the Build

Figure 4-35. Multiple Slot Filter Control Window