User`s manual

45
4.3.3: Equalizer Stage Processing Selection
The Equalizer Stage follows the Broadband Filter Stage in the processing chain. To select the type of
processing to be applied by the Equalizer Stage, use the filter select combo box (or “drop-down
menu”) shown in Figure 4-13. To make a selection, first click on the small arrow to the right of the
combo box and then, using the menu that appears, click on the desired selection.
Figure 4-14 Equalizer Stage Processing Selection Combo Box
Clicking the Config button causes the control window for the selected Equalizer type to appear. See
Section 4.5: for detailed information on control windows for each type of Equalizer stage.