User`s manual

34
Adapt Enabled
Button
Toggle control used either to freeze all adaptive filters (LED not
illuminated) or to allow non-frozen filters (as specified by the
Adapt button for each Filter) to adapt (LED illuminated
GREEN).
Clear All Button Clears the filter coefficient solutions of any adaptive filters
selected. If no adaptive filters are present, then the Clear All
button has no effect.
NOTE: To individually clear any adaptive filter without disturbing
other adaptive filters, click on its individual associated Clear
button.
Broadband Filter
Stage Box
Used to control the Broadband Filter Stage. In Mono and Stereo,
Linked Input Modes, one Filter block will be displayed. In Stereo,
Independent Input Mode, separate Filter blocks will be displayed
for the Left and Right channels. Select the type of broadband filter
to be implemented using the drop-down menu (See Section 4.3.3:
for more details). Setup the selected filter's parameters using the
Config button to view the control screen for that filter (See
Section 4.5: for further details). Switch each filter stage In or Out
of the process using the Active button.
Equalizer Stage
Box
Used to control the equalizer stages. In Mono and Stereo, Linked
Input Modes, one equalizer block will be displayed. In Stereo,
Independent Input Mode, separate equalizer blocks will be
displayed for the Left and Right channels. Select the type of
equalizer to be implemented using the drop-down menu (See
Section 4.3.3: for more details). Setup the selected equalizer's
parameters using the Config button to view the control screen for
that equalizer (See Section 4.5: for further details). Switch each
equalizer stage In or Out of the process using the Active button.
Communications
Box
Indicates the status of the RS232 communications between the
Master Control software and the External Processor. Normally
should indicate “Connected COM1”, “115200 Baud” if everything
OK; if the word “Closed” appears in the box, troubleshoot the
connection as described in Sections 6.1: and 6.2: .