User`s manual

23
40. Click on the Recall button to bring up the Recall 20-Band Graphic Equalizer window. The
window in Figure 3-13 will appear.
41. Select the file “Test1.tbg” that was saved in Step 36 to recall the slider settings previously
stored. Once you have clicked this button, the system will automatically return to the 20-Band
Graphic Equalizer control window and the stored slider settings will be restored
*
.
42. Click on OK to exit the 20-Band Equalizer Control Window.
43. Click on the Spectrum Analyzer button. This will cause the Spectrum Analyzer window
(Figure 3-14) to appear as follows: (The actual spectral display will depend upon the audio
being processed.)
Use the mouse to set up all controls as they appear in Figure 3-14. Make sure that the Left In
selection is chosen in the Trace 1 signal select box, that the Line Output selection is chosen in
the Trace 2 signal select box, and both Show Trace boxes are checked.
___________________________________
*
Any time a filter setting is stored, a file named “Previous Filter Settings.tbg” is created. If after recalling the settings,
you wanted to return to the original settings, you can reload this file.
Figure 3-13 Tutorial Recall 20-Band Graphic Equalizer Window