User`s manual

Note that in this configuration the digital OUTPUT RATE should be configured for AutoSYNC for

proper digital audio interaction with Pro Tools.

The PCAP II Plus Master Control program is written to be run on Windows® 98 Second Edition, Me,

NT 4.0, 2000, and XP. For best performance the following minimum system configuration is

recommended:

• Windows® XP operating system

• Intel Pentium® III CPU processor (at least 800 MHz)

• 256 Megabytes of RAM

• 10GB hard disk drive

• CD-ROM Drive

• 1024x768 color SVGA or LCD active-matrix display with 0.28 or better dot pitch

• Two-button mouse and/or touchpad

• At least one spare RS232 port

• Laser or dot-matrix printer

Performance will improve with higher speed CPUs and/or increased memory.

Please visit the Digidesign website at http://www.digidesign.com/ for complete information regarding

computer/OS compatibility for Pro Tools products. Integration of the PCAP II Plus product with Pro

Tools will require a computer platform that meets BOTH the requirements specified above and

Digidesign’s requirements.