User`s manual

161
8: PCAP II SPECIFICATIONS
Analog
Line Inputs (2) • Two rear panel RCAs: left for mono operation, left and right for
stereo operation, and for primary and reference for 2CH adaptive
filter operation.
• Z
in
= 50kΩ, level adjustable -8 to +15 dBm.
Line Outputs (2) • Two rear panel RCAs: left and right for stereo operation, single
output for mono and 2CH adaptive filter operation.
• Z
out
= 100Ω, V
out
= +8 dBm.
Headphone Output • Panel stereo jack and volume control. Suitable for 8 ohm stereo
headsets.
• Monitor switches for selecting PCAP Plus inputs or outputs, as
well as left / right / stereo channels.
Input Level Indicators • Two tricolor LEDs. Red (-6 dB), orange (-12 dB), green (-18
dB).
Bandwidth • Adjustable 3.2, 5.4, 6.5, 8.0, 11.0, and 16.0 kHz.
• 35 Hz AC input coupling.
Analog Conversion • 24-bit stereo A/D converter. 64X oversampling, sigma-delta
technology.
• 24-bit stereo D/A converter. 64X oversampling, delta-sigma
technology.
Dynamic Range • >90 dB.
Digital
Inputs / Outputs • S/PDIF format RCA connectors
• Output rate selectable between 44.1kHz and 48kHz, or
AutoSYNC to digital input sample clock, if DIGITAL input