User`s manual

151
2. To bypass all digital filters, allowing the original unfiltered audio to pass through to the LEFT
and RIGHT ANALOG OUTPUTS and S/PDIF digital OUTPUT RCAs, switch the
PROCESS/BYPASS switch to BYPASS. To filter the audio, switch to PROCESS.
3. The AUX switch is programmed to have one of the following functions when switched to
AUX:
a. No effect at all (default)
b. Input Limiter IN
c. Input HPF IN
d. Output AGC IN
e. Output HPF IN
f. Right channel Adapt/Freeze (ADAPT/FREEZE switch used for Left channel only)
g. Filter 2-6 Adapt/Freeze (ADAPT/FREEZE switch used for Filter 1 only)
When switched to OFF, the AUX switch always has no effect on the signal.
4. To clear all filters, press the CLEAR button. This will cause all adaptive filter
coefficients to be reset to zero, allowing them to re-converge anew (assuming the
ADAPT/FREEZE switch is in ADAPT).