User`s manual

147
3. Click on the selected memory. The following window (Figure 4-84) will now appear:
Figure 4-84 Auxiliary Switch Function Window
This window allows the function of the AUX switch on the external processor front
panel to be programmed. Click on the program option desired, then click on OK.
4. A message window will now appear to alert you that the previous contents of the
selected memory will be lost, and that 30 seconds could be required to transfer all
settings to the memory. Additionally, the window will suggest that you also save your
setup in a disk file. Click on Yes if you wish to proceed, or click on No to cancel
without affecting the current memory contents.
An "hourglass" cursor will now appear, indicating that the external processor is busy storing
the setup in the selected Stand-Alone memory. For complete instructions on operating the
PCAP II Plus external processor from the Stand-Alone memories, please consult Section 5: .