User`s manual

146
4.10.4: Storing Setups to External Processor Stand-Alone Memories
Application:
The PCAP II Plus external processor has the capability to store up to ten enhancement setups
internally in nonvolatile Stand-Alone memories, allowing the external processor to be
operated in those setups without needing to be connected to a PC. This makes it possible to
store sophisticated enhancement setups in one or more external processors in the laboratory,
then use them as portable field processors which have simple controls that can be operated by
anyone. Thus, with this feature, the complete capabilities of the enhancement laboratory and
the expertise of the laboratory personnel can be extended to field operations.
For all memories, the function of the AUX switch on the external processor front panel can be
specified.
Store a setup in a nonvolatile memory as follows:
1. Adjust all Master Control, General Filter Stages, Broadband Filter Stages, and
Equalizer settings as desired to achieve the desired enhancement setup. This may also
be accomplished using the Open Setup File feature described in Section 4.10.2: .
It is strongly suggested that you save this enhancement setup to disk using the Save
Setup File feature described in Section 4.10.1: . NOTE: There is no way for the
Master Control program to retrieve from the PCAP II Plus and interpret the settings
and coefficients stored in the Stand-Alone memories.
2. Click on Stand-Alone on the Master Control Panel menu bar to access the following
pulldown menu (Figure 4-83):
Figure 4-83 Stand-Alone Pulldown Menu