User`s manual

141
4.10: MASTER CONTROL PULLDOWN WINDOWS
4.10.1: Saving Setups to Disk Files
Application:
To save time configuring detailed control settings, complete setups may easily be saved to disk
setup files for future reuse. These files are particularly handy when making presentations
which require multiple setups, or when it is desired to precisely duplicate the enhancement
procedure at some point in the future. Also, this feature allows easy transfer of enhancement
setups between PCAP II Plus systems simply by exchanging the “.DAC” setup files.
Note: Any “.DAC” setup files previously stored by the Digital
Audio Corporation PCAP, PCAP II, or MCAP software can be loaded by the PCAP II
Plus software.
Save a setup to a disk file as follows:
1. Click on File on the Master Control menu bar. When the pulldown menu appears,
click on Save Setup File. This will cause the window in Figure 4-79 to appear:
2. Normally, it will not be necessary to change the path setting; if, however, you desire to
place the setup file into a different drive (such as a floppy drive) or folder, utilize the
explorer to navigate the available drives and folders and make the desired selection.
3. Each stored setup will have a user-entered text Description to uniquely identify it. You
must enter the Description text before storing the file. To enter or edit the
Description text, click on the Description text box and type in any text desired. It is
recommended that the text be descriptive of the setup's application.