User`s manual

95
In this window, you can make the entire filter curve drop by a specified amount prior to editing
the curve. This can be used to create headroom which can be used to increase the gain
(decrease the attenuation) in one portion of the curve relative to the rest of the curve. For now,
select a drop of 0dB (No Drop) and click on Proceed.
7. You should now notice that all the buttons on the control window have been replaced with a
single Abort button, which permits returning to the pre-Edit filter.
To edit out the dip, you will first need to define the edit region by carefully specifying the left
and right edges of the portion of the filter curve that you wish to modify. Click your mouse to
the left and to the right of the dip to produce the following display (Figure 4-55):
8. Now, draw in the new portion of the filter curve using mouse clicks as in Step 4, above,
roughly as shown below (Figure 4-56).
Figure 4-54 Hi-Res Graphic Edit Window
Figure 4-55 Hi-Res Graphic Define Edit Region