User`s manual

94
5. Complete drawing the filter curve as shown below (Figure 4-53) by drawing points all the way
to the right edge of the filter display area.
When you have drawn the last point (must be at or beyond the right edge of the filter display
area), the mouse cursor will change to an "hourglass" shape for a few seconds while the filter is
being calculated. When the calculations are complete, the mouse cursor and the buttons in the
Hi-Res Graphic control window will return to normal appearance.
6. Suppose you decide that you would like to remove the "dip" which occurs in the filter curve at
approximately 3500 Hz in Figure 4-53, above. Click on Edit to bring up the following display
(Figure 4.51):
Figure 4-52 Hi-Res Graphic Draw in Progress
Figure 4-53 Completed Hi-Res Graphic Draw