User Guide

ADDING YOUR FILES TO A COLLECTION
6
6-15
IMAGEAXS PRO MACINTOSH USER’S GUIDE
STEP 4 Click Select "(the name of your folder)".
The name and Finder hierarchy for the folder appear to the
left of the Set button.
STEP 5 In the box labeled Names for Acquired Files, decide how to
name your new files.
Names consist of a stem (a prefix or a suffix) attached to a
number — a stem of NewSound and a starting number of 1
will produce files named NewSound001 (or 001NewSound),
NewSound002 (or 002NewSound), and so on.
To define file names, do the following:
• Click 001<stem> or <stem>001 to determine whether the stem
appears after or before the number.
• Type the stem in the Stem text entry box.
• Type the starting number in the Start At Number text entry box.
STEP 6 Click OK to save your settings for this method of acquiring files.
If you click Cancel, the Set Up Input Device dialog box
closes without any changes to your previous settings.
STEP 7 In the Source File menu, highlight Acquire, then select Sound
Input from the submenu that appears.
A dialog box interface for recording sound appears.
NOTE
If you select Sound Input from the Acquire submenu but have not defined
the necessary settings for this method of acquiring files, the Set Up Input
Device dialog box will appear instead (see Step 1).
STEP 8 Click Record to begin capturing sounds.
A data record for each sound file you capture appears in the
ImageAXS Pro collection.
To acquire files from your sound device again using the same setup
options, begin with Step 7 above.
ACQUIRING FROM
A
DOBE
P
HOTOSHOP
If you have moved the IAXAcquire/Export plug-in from the folder
in which you installed ImageAXS Pro into the Plug-ins folder for
Adobe Photoshop (see “Installing Plug-ins” on page 2-4), you can
launch ImageAXS Pro and acquire image files while using Adobe
Photoshop or a compatible program.