User's Manual
VuLink Operation & Installation Guide 860‐00198‐00 REV E
DigitalAlly,Inc.|InstallationInstructions 2‐1
Section‐2: InstallationInstructions
Step 1: Prepare the vehicle
1. VuLink is typically mounted on the windshield near the roofline area. Plan a safe path for
the base cable from the windshield area to your power source and remove necessary
body trim pieces. Remove front passenger side threshold.
2. Pull the door seal away.
3. Remove the passenger side front interior A-pillar cover.
4. Remove the passenger side kick panel & pull back the carpet to expose the vehicle
chassis.