User's Manual

FirstVu HD One™ Operation Guide 860-00260-00 Draft 02
Digital Ally, Inc. | Device Configuration – VuVault
10
 Clear Data and Activate Device – this option erases any data on the
internal memory and activates it.
Always ensure that all relevant data has been previously uploaded to the system
before deleting it from the FirstVu HD One.
8. Click the Activate button. The Status field will indicate when the process has
completed.
VuVault will create files named “deviceconfig” and “AssignedTo” and place into
the root folder of the FirstVu HD One. These and all other media files are
accessible to the user only if Secure USB Port is disabled within the VuVault
Admin>Settings>FirstVu HD One Defaults Menu.
If Secure USB Port is enabled, the only accessible information is the
dvminfo.log file. The dvminfo.log file contains basic information about your
device such as serial number and firmware version. Video uploads and device
configuration MUST be done through VuVault when this option is enabled.
9. Reboot your FirstVu HD One by turning the power switch OFF, then ON.
The FirstVu HD One is now activated and ready for use. For more information consult
the VuVault Administrator’s Guide Media Card Administration section.