Specifications

Upgrade to New Control Board
ADDvantage-32 PLUS ● AC to DC Power Converter
12-7
4. Remove the two ribbon cables that provide connections between the electronics
enclosure and the bridge interface board. The two cables have the part numbers
B20726-1 and B20727. The cables that are shown in Figure 12-3 below are plugged
into connectors on the printed circuit boards within the ADDvantage-32 electronics
enclosure. The B20726-1 cable will be reused with the ADDvantage-32 PLUS and
should be retained. The B20727 cable will not be reused.
Figure12-3. The ADDvantage-32 electronics enclosure shows the two cables to be
removed.