Specifications

USB Usage
ADDvantage-32 PLUS ● AC to DC Power Converter
11-17
11.4.1 DRIVE INFORMATION STORE COMPLETION MESSAGES
After the user has initiated the operation to save the drive information to the USB
memory stick, one of the following messages will be displayed to indicate the results of
the requested operation:
Message Meaning
DRIVE INFO SAVED The drive information successfully saved to the
USB memory stick.
D-INFO SAVE ERR An internal software error is detected during
the writing of the drive information.
NO USB DEV PRSNT No USB memory stick is detectable in the
drive.
11.5 USB CALIBRATION/CONFIGURATION LOAD
The ADDvantage-32 PLUS drive allows the user to load the drive calibration and
configuration information from a file located on the USB memory stick.
To perform a USB flash load of calibration and configuration information from the USB
memory stick, navigate the USB submenu until reaching the USB CAL LOAD option as
shown below:
Pressing the RIGHT key will then display the following:
The second line of the display will show the first 11 characters of the first calibration and
configuration file found on the USB memory stick. Files with an extension of “.add” are
considered to be ADDvantage-32 PLUS calibration/configuration files.
USB CAL LOAD
------>
USB CAL LOAD
FILE:xxxxxxxxxxx