Specifications

USB Usage
ADDvantage-32 PLUS ● AC to DC Power Converter
11-7
11.1.1 ANALYZER STORE COMPLETION MESSAGES
After the user has initiated the operation to store the signal analyzer information to the
USB memory stick, one of the following messages will be displayed to indicate the
results of the requested operation:
Message Meaning
---ALYZR SAVED-- Operation completed successfully
ALZR SAVE ERROR Error resulted during the attempt to save
analyzer files
ALZR SAVE CANCEL Operator cancelled SAVE by hitting LEFT
ARROW key
NO USB DEV PRSNT No USB memory stick is detectable in the
drive
NO ANLR CHN DONE No analyzer data is available to be stored
11.1.2 ADDAPT PROPERTIES VIEW OF USB ANALYZER FILES
As noted previously, files written to the USB memory stick may be viewed on any
personal computer equipped with a USB port. Specifically, the signal analyzer files may
be read by the ADDAPT maintenance tool.
When viewing the files using ADDAPT, Figure 11-5 shows the PROPERTY view of an
analyzer file that has been saved to the USB stick. Several of the properties of an
analyzer file stored by the drive to the USB memory stick are set to specific values:
• AREA 1-The date and time of an analyzer file stored to the USB stick will always
show as 01-01-01 (or January 01, 2001) at 12:00:00.
• AREA 2-The source name will be “USB_DRV” with the three digit drive ID as set by
jumpers on connector J8.
• AREA 3- The comment section will always be “Analyzer file stored to USB.”