Specifications

Signal Analyzer
ADDvantage-32 PLUS ● AC to DC Power Converter
5-3
5.2 TRIGGER
Set for a rising edge or falling edge trigger, the recorder can be triggered from any analog
or digital bit information located in the data tables. The recorder must be disabled to
change these parameters. Default for all eight recorders:
RECORDER CONFIGURATION DEFAULT
CHANNEL PARAMETER VALUE
______________________________________________________________________
#1 Z***:TRIG1 A/D Q***:ANALOG
Z***:TRIG1 ANALOG A***:ACT SPEED
Z***:TRIG1 DIG D***:FAULT
Z***:TRIG R/F 1 Q***:RISING
Z***:TRIG LEVEL1 0.5
#2 Z***:TRIG2 A/D Q***:ANALOG
Z***:TRIG2 ANALOG A***:ACT SPEED
Z***:TRIG2 DIG D***:FAULT
Z***:TRIG R/F 2 Q***:RISING
Z***:TRIG LEVEL2 0.5
#3 Z***:TRIG3 A/D Q***:ANALOG
Z***:TRIG3 ANALOG A***:ACT SPEED
Z***:TRIG3 DIG D***:FAULT
Z***:TRIG R/F 3 Q***:RISING
Z***:TRIG LEVEL3 0.5
#4 Z***:TRIG4 A/D Q***:ANALOG
Z***:TRIG4 ANALOG A***:ACT SPEED
Z***:TRIG4 DIG D***:FAULT
Z***:TRIG R/F 4 Q***:RISING
Z***:TRIG LEVEL4 0.5
#5 Z***:TRIG5 A/D Q***:ANALOG
Z***:TRIG5 ANALOG A***:ACT SPEED
Z***:TRIG5 DIG D***:FAULT
Z***:TRIG R/F 5 Q***:RISING
Z***:TRIG LEVEL5 0.5
#6 Z***:TRIG6 A/D Q***:ANALOG
Z***:TRIG6 ANALOG A***:ACT SPEED
Z***:TRIG6 DIG D***:FAULT
Z***:TRIG R/F 6 Q***:RISING
Z***:TRIG LEVEL6 0.5