Specifications

Control Block Description ADDvantage-32 PLUS
4-122
3. Implementation
If RES is high, then the output DIA = IDIAM.
If DIA is calculated to go beyond the MAX diameter or MIN diameter limits, then DIA
will be clamped at the limit.
When the RES bit is set low, the DIA is calculated by the following:
If UP/DWN is high, then:
DIA = (LNTH/GAIN × 2 × THCK) + IDIAM
If UP/DWN is low, then:
DIA = IDIAM - (LNTH/GAIN × 2 × THCK)
Length needs to be configured to the frequency counter from the winder tach. The
counter needs to be reset at new roll.
Length divided by Gain should be equal to roll revolutions for the block to work
properly.