Specifications

Control Block Description ADDvantage-32 PLUS
4-39
3. Implementation
When RES is high or on power up, the outputs = 0.
When not RES, the following occurs:
The outputs do not change until the number of winder revolutions equals WRAPS.
(1 winder revolution = PPR amount of change in the CNT value.) When this occurs, the
following calculations are done.
DIA = DIA at start of wraps count
thick = (DIA - DIA)/(2 × WRAPS)
DEN = (WGHT/thick)
ADIA = (DIA + DIA)/2
The outputs do not change until the next time the number of winder evolutions equals
WRAPS or a RES occurs.