Instruction manual

20
5. Original engine equipped with Dual Circuit alternator.
Replacement engine equipped Tri-Circuit alternator.
Discard êçïçëë diode harness supplied with new engine. Install éçìíêð êçîíðê
harness and modify by splicing in íçççïê connector assembly. Connect to equipment harness.
6. Original engine equipped with 5 amp regulated system.
Replacement engine equipped with Tri-Circuit alternator.
Discard êçïçëë diode harness supplied with new engine. Transfer ìçïëìê
engine. Connect to equipment harness.
7. Original engine equipped with DC Only alternator.
Replacement engine equipped with 5, 9, 10 or 16 amp regulated system.
Direct Replacement. Connect to equipment harness.
8. Original engine equipped with 5 amp regulated system.
Replacement engine equipped with 9, 10 or 16 amp regulated system.
Direct Replacement. Connect to equipment harness.
9. Original engine equipped with 9 amp regulated system.
Replacement engine equipped with 10 or 16 amp regulated system.
Direct Replacement. Connect to equipment harness.
10.Original engine equipped with 10 amp regulated system.
Replacement engine equipped with 9 or 16 amp regulated system.
Direct Replacement. Connect to equipment harness.
ÛÏË×ÐÓÛÒÌ
ØßÎÒÛÍÍ
Î×Þ
Î×Þ
íçíìîî
ØßÎÒÛÍÍ
ÍÐÔ×ÝÛ
ÑËÌÐËÌ ÝÑÒÒÛÝÌÑÎ
ÚÎÑÓ ßÔÌÛÎÒßÌÑÎ
íçççïê ÝÑÒÒÛÝÌÑÎ
ßÍÍÛÓÞÔÇ
éçìíêð
ÎÛÙËÔßÌÑÎñÎÛÝÌ×Ú×ÛÎ