Instruction manual

10
AC VOLTAGE OUTPUT CHECK v
1. Insert RED test lead into v receptacle in
meter.
2. Insert BLACK test lead into
ÝÑÓ
receptacle in
meter.
3. Rotate selector to position.
4. Attach RED test clip to alternator AC output
terminal(s).
5. Attach BLACK test clip to engine ground.
ÒÑÌÛæ When checking AC voltage output of stator
on 10-16 and 20 amp regulated or Quad-
Circuit alternator systems, attach one
meter test clip to each output pin terminal
in YELLOW connector from stator. Test clip
leads may be attached to either output pin.
6. With engine running at 3600 RPM, AC output
alternator type in Table 2.
ßÝ Ê±´¬¿¹» Ñ«¬°«¬ ݸ»½µ
ÌßÞÔÛ î
ßÔÌÛÎÒßÌÑÎ ßÝ ÑËÌÐËÌ ßÌ íêðð ÎÐÓ
AC ONLY 14 VOLTS
DUAL CIRCUIT 14 VOLTS
28 VOLTS
40 VOLTS
TRI-CIRCUIT 28 VOLTS
QUAD-CIRCUIT 30 VOLTS
20 VOLTS
30 VOLTS
26 VOLTS
magnet size.
ÝÑÒÒÛÝÌÑÎ
ÜËßÔ
Ý×ÎÝË×Ì
ÎÛÜ ÝÔ×Ð ÌÑ
ßÝ Í×ÜÛ ÑÚ
ØßÎÒÛÍÍ
øÞÔßÝÕ É×ÎÛ÷
ÌÛÍÌ ÝÔ×Ð ÌÑ
ßÝ ÑËÌÐËÌ Ð×Ò
ÌÛÍÌ ÝÔ×Ð ÌÑ
ß ÙÑÑÜ ÙÎÑËÒÜ
ÍËÎÚßÝÛ
ÝÑÒÒÛÝÌÑÎ
ÌÛÍÌ
ÝÔ×Ð
ÝÑÒÒÛÝÌÑÎ
ÝÑÒÒÛÝÌÑÎ
ÌÛÍÌ
ÝÔ×Ð
ßÌÌßÝØ
ÓÛÌÛÎ
ÌÛÍÌ
ÝÔ×ÐÍ
ÏËßÜóÝ×ÎÝË×Ì
ïð ßÓÐ Ý×ÎÝË×Ì
ïê ßÓÐ Ý×ÎÝË×Ì
ç ßÓÐ ÎÛÙËÔßÌÛÜ
ÌÎ×óÝ×ÎÝË×Ì
Í×ÒÙÔÛ Ý×ÎÝË×Ì
ßÝ ÑÒÔÇ