User guide

Setting up Your Digitag Scale (cont.)

7. Press “Pair”

8. Once you've paired BarkeepApp with the scale, the Device Status should change to Paired.

9. The PIN should be left blank – the XHBMS does not require a PIN.

Note: When your iOS Device is searching for the Digitag Bluetooth scale it might also detect other

Bluetooth devices nearby. An older iPhone or iPod Touch might detect a new Reflex Bluetooth digital

scale, but it will not be compatible with the Reflex Bluetooth unless it is an iPhone 4S and later or an

iPod Touch 5th generation and later.

Setting the Digitag Bluetooth Scale to Zero

Before beginning to weigh Items, we recommend setting the scale to Zero.

You will not need to do this

for each Item, but should set the scale to Zero every time you begin a session of weighing Items.

Reminder: You must use a Digitag Bluetooth scale with a Linea-Pro scanner with Bluetooth support or an

Infinea Tab scanner with Bluetooth support.