User guide
64
Setting up your Reflex Scale
The Reflex Bluetooth digital scale is the newest model digital scale available from Barkeep.
To purchase a Reflex Bluetooth digital scale, see barkeepapp.com.
Getting Started
The instructions are simple:
1. The first step is to install 4 (four) AAA batteries. The battery compartment is located on the
underside of the scale. After you have installed batteries, you are ready to start using your
Reflex Bluetooth digital scale.
Note: The Reflex Bluetooth digital scale has a built-in battery that can be charged with a USB
charger. The built-in battery is designed to be a back-up power source. We recommend always
installing AAA batteries for optimal performance.
2. Turn on your scale.
3. Verify that your iOS Device’s Bluetooth support is turned on (see below).
4. Launch BarkeepApp on your compatible iOS Device.
Make sure your iOS Device has Bluetooth turned on and you are using an iOS Device that supports
Bluetooth LE (Low Energy). The following iOS Devices will work with a Reflex Bluetooth digital scale:
• iPhone 4S or later
• iPod Touch 5th generation and later
• iPad 3rd generation and later
• iPad Mini
With the Reflex Bluetooth digital scale you do not need to take
additional the steps to register the scale with Barkeep. You do not to
“pair” the scale with your iOS Device(s). The Reflex Bluetooth
digital scale works directly with your iOS Device. It does not require
the use of a Linea-Pro or an Infinea Tab scanner.
Reminder: There are many other models of the Reflex Bluetooth
digital scales available. Only those purchased from barkeepapp.com
are certified to work with BarkeepApp. Other models will not work
with BarkeepApp and are not supported by Barkeep. We are not
able to provide assistance with or answer questions about scales
purchased elsewhere.
Note: For instructions for weighing bottles are on see page 51.