User guide

57
Adding and Weighing Partial Bottles (cont.)
Weighing the Bottles
The following pages have instructions that are for all users who weigh their bottles. Below are instructions
for users who weigh their bottles with a digital scale and then enter the weight manually. The next page has
instructions for users with an approved Bluetooth digital scale purchased from Barkeep that will enter the
weight automatically into your Inventory. This section continues on page 59 with general instructions for
entering and weighing multiple bottles of the same Item.
Manually Weighing Bottles
To weigh a bottle (or other container) and manually add the amount to an Inventory:
1. Select the Item.
2. Switch the quantity format from Bottles to Wt.
3. Be sure that your Weight Format set in Barkeep matches the format used by your scale
(see page 8).
4. Place your bottle on the scale. Enter the weight of the partial bottle.
5. You can move between the weight fields (lb, oz, 1/8) by pressing the button.
6. Press to add the Item to your Inventory or to discard it.
continue to next page for using a Bluetooth digital scale