User guide

53
Adding and Weighing Partial Bottles (cont.)
Using the correct Weight Display Format
Barkeep allows you to enter partial bottle weights in Pounds, Ounces and 1/8’s of an ounce rather than
Ounces so that you don’t have to translate the data from your digital scale before entering it into
BarkeepApp. In other words, you can set BarkeepApp to match the Weight Format your scale uses. You can
also enter weight in 1/10’s of an ounce, kilograms or grams.
We recommend setting the weight format on the scale to the weight format you use in Barkeep to make it
easier to verify bottle weight as it is being read from the scale.
The example below shows you how to change your Weight Format and enter data in Pounds, Ounces, and
1/8’s of an Ounce:
1. Go to Settings and verify that you have selected the correct weight format.
See Weight and Measures Settings Section for details.
2. Choose the center Wt button.
3. Enter the correct weight.
4. Pressing the fields will allow you to navigate as needed to enter pounds and ounces, etc.
Note: It is easy to forget to switch back and forth between Full Bottles/Kegs/Cans and Wt on the
Unit Selection control, so we recommend that you first enter all of the full bottles, and then enter all of
the partial bottles by weight afterwards so that you don’t forget to switch back and forth.
continue to next page