User guide

7
Changing the Weight Display Format
!
Barkeep allows you to enter partial bottle weights in pounds, ounces, 1/10 and 1/8’s of an ounce rather than
ounces or even kilograms or grams. This means that you do not need to translate the data from your digital
scale before entering it manually into BarkeepApp. In other words, you can set BarkeepApp to match the
Weight Format your scale uses.
Digitag Bluetooth digital scale users can just select the Weight Format they prefer. When using the Digitag
Bluetooth
digital scale, BarkeepApp automatically displays the Weight Format you choose. The scale itself
does not display the weight.
The example below shows you how to change your Weight Format and enter data in ounces:
1. Select "Settings" from the Main Screen. Next select General. Verify that you have selected the
correct weight format.
See the BarkeepApp User Guide for the for more details about Weight Format Settings
2. Press Save on the bottom toolbar to save your changes or select Cancel to discard them.
Setting Full and Empty Bottle Weight
Before you start weighing bottles during an Inventory you must make sure an Item’s Full Bottle Weight and
Empty Bottle Weight are included in the Item details. Many of the pre-installed “default” Items as well as
some of the over 75,000 Items on the Barkeep Server have weight information.
See BarkeepApp User Guide for more information on pre-installed Items and for instructions of setting
Full Bottle Weight and Empty Bottle Weight for your Items.
continue to next page