User guide

5
Changing the Weight Display Format
!
Barkeep allows you to enter partial bottle weights in pounds, ounces, 1/10 and 1/8’s of an ounce rather than
ounces or even kilograms or grams. This means that you do not need to translate the data from your digital
scale before entering it manually into BarkeepApp. In other words, you can set BarkeepApp to match the
Weight Format your scale uses.
Reflex Bluetooth digital scale users can just select the Weight Format they prefer. When using the Reflex
Bluetooth
digital scale, BarkeepApp automatically displays the Weight Format you choose. The scale itself
may be set to a different display format. We recommend setting the weight format on the scale to the weight
format you use in Barkeep to make it easier to verify bottle weight as it is being read from the scale.
The example below shows you how to change your Weight Format and enter data in ounces:
1. Select "Settings" from the Main Screen. Next select General. Verify that you have selected the
correct weight format.
See the BarkeepApp User Guide for the for more details about Weight Format Settings
2. Press Save on the bottom toolbar to save your changes or select Cancel to discard them.
Note: To change the Reflex Bluetooth digital scale’s display format locate the unit button in the
underside of the base of the scale. It is next to the battery compartment.
Short press the button until the desired unit is shown in the LED screen.
continue to next page