User guide

3
Setting up a Reflex Bluetooth Digital Scale
Batteries
The first step is to install 4 (four) AAA batteries. The battery compartment is located on the underside of the
scale. After you have installed batteries, you are ready to start using your Reflex Bluetooth digital scale.
Note: The Reflex Bluetooth digital scale has a built-in battery that can be charged with a USB charger. The
built-in battery is designed to be a back-up power source. We recommend always installing AAA batteries for
optimal performance.
Getting Started
After you have installed batteries, you are ready to start using your Reflex Bluetooth digital scale.
The instructions are simple:
1. Turn on your scale.
2. Verify that your iOS Device’s Bluetooth support is turned on.
3. Launch BarkeepApp on your compatible iOS Device.
With the Reflex Bluetooth digital scale you do not need to take additional the steps to register the scale with
Barkeep. You do not to “pair” the scale with your iOS Device(s). The Reflex Bluetooth digital scale works
directly with your iOS Device. It does not require the use of a Linea-Pro or an Infinea Tab scanner.
Reminder: There are many other models of the Reflex Bluetooth digital scales available. Only those
purchased from barkeepapp.com are certified to work with BarkeepApp. Other models will not work with
BarkeepApp and are not supported by Barkeep. We are not able to provide assistance with or answer
questions about scales purchased elsewhere.