Basic PDU Manual DN-95620 · DN-95621
Content Before you start........................................................................................................................ 3 Power Consumption ................................................................................................................. 3 Read the following carefully after power supply ...................................................................... 4 Mounting .....................................................................................................
Before you start Check to ensure the existence of earth wire before connecting power supply. Connect the power cord in the right way; keep an eye on maximum power consumption. Power Consumption Read the following instructions carefully before the installation or operation of this product 1. This power distribution unit (PDU) is for indoors use only. 2. Check to ensure that the marked nominal voltage is same as the service voltage in the country or region.
Read the following carefully after power supply 1. In a PDU with surge protection module, there are 3 seperate indicators: A: Red light: When active, means the absence of earth wire of the power supply system, which shall be the case to contact an electrician for a professional check and grounding. B: Yellow light: When active, means that wire L and null wire N are not in the correct position. Which shall be the case to contact an electrician for a professional check and re-arrangement of such lines.
Mounting Mounting Option PDU is compatible with standard cabinet (482.6mm (19”)) or non-standard cabinet Mounting Bracket 1. Before the product leaves factory, the brackets are installed at the two ends of PDU Mounting Bracket Mounting Bracket 2. The removable brackets of PDU can be installed according to your choice Front installation Inverse installation Frontal side installation Inverse side installation Mounting Methods Illustration 1. Choose a proper location for mounting.
2. Align the mounting holes on the bracket with the installed caged nuts, insert and turn a screw in the tightened position. Service Technical service For you defective PDU, you can 1. Contact your local dealer or technical support 2. Note the specification, batch number, serial number and data of purchase 3. Call customer supplier or authorized sales and service center on the phone, the technician will be there at the first time to handles the defects.
