Instruction manual

5. Appendix
5.1 TECHNICAL SPECIFICATIONS
Analog Inputs
Connectors XLR and 1/4" jack
Type RF filtered, servo balanced , 20kOhms unbalanced
Impedance 40kOhms balanced, 20kOhms unbalanced
Nominal Operating Level -20dB to +4dB
Max. Input Level +16dB at +4dB nominal level, +2dB at -20dB nominal level
Analog Outputs
Connectors XLR and 1/4" jack
Type Electronically servo-balanced output stage
Impedance 66Ohms balanced, 33Ohms unbalanced
Max. Output Level +16dB at +4dB nominal level, +2dB at -20dB nominal level
System specifications
Bandwidth 20Hz to 20KHz
S/N 98dB, A weighted, 20Hz to 20KHz
THD 0.065%typ. 1KHz, 0dB INPUT
Crosstalk -95dB, 20Hz to 20KHz
MIDI Interface
Type 5-Pin-DIN-Socket IN/OUT/THRU
Digital Processing
Converters 24-bit Sigma-Delta, 64/128-times Over-sampling
Sampling Rate 48KHz
Display
Type 16X2 LCD-Display
Power Supply
Mains Voltages General Export Model 100-120 VAC, 200-240 VAC, 50-60Hz~~
Fuse 100-120 VAC:250mA(slow-blow)
200-240VAC:125mA(slow-blow)
Power Consumption 10 Watts
Mains Connection Standard IEC receptacle
Physical
Dimensions(H*W*D) 45mm 482mm 152mm
Shipping Weight 3kg
All technical specifications in DIGISYNTHETIC products are subject to changes for product improvement
with withoutor NOTICE.
Page 8