Instruction manual

MIDI
Sequencer
MIDI Out
MIDI In
MIDI Thru
MIDI In
MIDI Out
MIDI Out
MIDI In 1
MIDI In 2
DIGISYNTHETIC
Fig 4.2 : Connection the DS202 via MIDI to a sequencer/computer and a keyboard
In L
In R
AUX
1(&2)
Out
AUX
Return
Fig 4.1 : Aux Connection DS202
Page 7
4. APPLICATION
4.1 Connection & Application in Aux bus by DS202
By using the DS202 in an aux bus of your mixing console, to use the DS202 in the aux bus, the unit must
be wired as follows:
4.2 MIDI APPLICATION WITH DS202
With its built-in MIDI interface the DS202 can be integrated into any MIDI system, where it transmits and
receives both program change and controller change information to perform program changes via MIDI
from a sequencer or any other MIDI device. MIDI connection set up as Fig 4.2.
COMPRESSOR /
EXPANDER
DIGISYNTHETIC
D 202S
COMPRESSOR /
EXPANDER
DIGISYNTHETIC
D 202S
L
R
DYNAMIC COMPRESSOR/EXPANDERDYNAMIC COMPRESSOR/EXPANDER
CLIP
CLIP
THRES./MIDITHRES./MIDI
MASTER
TIME
BYPASS
RATIO/LOCK
COMP./EXPAN.
ON
OFF
DYNAMIC COMPRESSOR/EXPANDERDYNAMIC COMPRESSOR/EXPANDER
CLIP
CLIP
L
R
THRES./MIDITHRES./MIDI
MASTER
TIME
BYPASS
RATIO/LOCK
COMP./EXPAN.
ON
OFF