Datasheet

Maßstab
Tag Name
F/TCW-05LF
Vervielfält.-Pause
Nr.
Arbeitspause Nr.
Tag Name
gezeichnet
bearbeitet
geprüft
normgepr.
Ersatz f.
Zeichn.
Zeichn.-Nr.
101222.1B
Untolerierte Maße
Halbzeug, Werkstoff
Änd. Änd.-Mittlg.
zust. Nr.
22.12.10 MZ
Page Blatt 3 of von 4
Reliability Zuverlässigkeit
NO.
ITEM
TESTING CONDITION
VARIANCE AFTER TEST
1
Humidity
50±5℃, 93(+2/-3)%RH, 96HRS
All specifications must be
satisfied after the test
2
High temp.
+80±2℃, 96HRS
3
Low temp.
-30±2℃, 96HRS
4
Temperature
cycling
-30±2℃, 30 minutes
room temp. 15 minutes
+80±2℃, 30 minutes
room temp. 15 minutes
5 cycles
5
Drop test
3 times from height of 70cm onto the
sureface of 10mm thick wooden
board.
6
Vibration test
Make the test for the directions of X
Y and Z (total 0.5 hours).
To-and-fro sweep time (from 10 to
55 Hz and then 55 to 10) under
single amplitude of 1.0mm is 1
minute.
7
Solder heat
resistance
The part leads (pins) shall be
immersed in molten solder
maintained at 250±10℃ for a period
of 30 seconds.
After the test part shall meet
specifications without any
degradation in appearance
and performance.