Datasheet

Tag Name
gezeichnet
bearbeitet
geprüft
normgepr.
Maßstab
Tag Name
F/HU110P 24V B
Vervielfält.-Pause
Nr.
Arbeitspause Nr.
Ersatz f.
Zeichn.
Zeichn.-Nr.
011219.1S
Untolerierte Maße Halbzeug, Werkstoff
Ä
nd.
Ä
nd.-Mittlg.
zust. Nr.
19.12.01
19.12.01
Page/Blatt 2 of/von 2
Reliability
ITEMS
METHOD OF TEST AND MEASUREMENTS PERFORMANCE
Coldness
withstanding
After 98 hours of being exposed to –30°C environment,
should returned to normal environment for 2hours,
then re-proceed to test.
No abnormality
shall exist
Hotness
withstanding
After 98 hours of being exposed to +70°C
environment, should returned to normal environment
for 2hours, then re-proceed to test.
No abnormality
shall exist
Humidity
withstanding
After 98 hours of being exposed to 40°C 95%RH
environment in actual operation, should returned to
normal environment for 2hours, then re-proceed to
test.
No abnormality
shall exist
Durability Testing after 1000hours actual continuous operation No abnormality
shall exist
Shock
withstanding
A natural drop from 75cm high down to the ground. No abnormality
shall exist
Vibration
withstanding
Vibration of 2000 cycles per minute, 2mm amplitude,
applied in X, Y and Z directions for 30 minutes each.
No abnormality
shall exist