Datasheet

Tag Name
gezeichnet
bearbeitet
geprüft
normgepr.
Maßstab
Tag Name
F/CM12P
Vervielfält.-Pause
Nr.
Arbeitspause Nr.
2-3
Ersatz f.
Zeichn.
Zeichn.-Nr.
090924.1H
Untolerierte Maße Halbzeug, Werkstoff
Änd. Änd.
-
Mittlg.
zust. Nr.
2
4
.0
9
.
0
9
KH
TEST METHOD:
RELIABLY TEST:
NO.
ITEM
TESTING CONDITION VARIANCE AFTER TEST
1 Humidity 50±5°C, 93(+2/-3)%RH, 96HRS
2
High temp.
+80±2°C, 96HRS
3 Low temp. -30±2°C, 96HRS
4
Temperature
cycling
-30±2°C, 30minutes
room temp. 15minutes
+80±2°C, 30minutes
room temp. 15minutes
5 cycles
5 Drop test
3 times from height of 70cm onto the surface of
10mm thick wooden board.
6 Vibration test
Make the test for the directions of X Y and Z
(total 0.5 hours).
To-and-fro. sweep time (from 10 to 55 Hz and
then 55 to 10 ) under single amplitude of
10mm is3minute.
All specifications must be satisfied
after the test.
7
Solder heat
resistance
The part leads (pins) shall be immersed in
molten solder maintained at 250±10°C for a
period of 30 seconds.
After the test part shall meet
specifications without any degradation
in appearance and performance.