User manual

DG-BG4300N User Manual
When it set to “None”, the DHCPv6 Server function will be disabled on LAN side; when it set to
“Auto”, the router will use the prefixes and DNS obtained from PD options for DHCPv6 on WAN
side to generate the address pool; when it set to “Manual”, the router will use the user specified
pool prefix and DNS configurations.
On the “Manual” mode, user should also specify the “IPv6 Address Pool”, “Prefix Length”,
“Preferred Time”, “Valid Time” and “DNS Servers”.
IPv6
Address
Pool
Specify the DHCPv6 address pool. It can be either a pool range or a single address.
Prefix
Length
Specify the prefix length of the addresses pool.
Preferred
Time
Specify the preferred lifetime for this prefix address, in seconds.
Valid Time
Specify the valid lifetime for this prefix address, in seconds.
DNS
Servers
Specify the IPv6 address for the DNS servers.