User manual

DG-BG4300N User Manual
4. Web Browser Configuration
The DSL device is an ADSL2+ wireless router. When you power on the device, the system will boot up
and connect to ADSL automatically. The system provides a PVC for bridge test by default. The default
configurations for the system are listed below.
 LAN IP address: 192.168.1.1, Netmask: 255.255.255.0
 Default VPI/VCI for ATM (maximum 8 sets): 0/32, 1/32, 0/35
 ADSL Line mode: Auto-detect.
User can change settings via WEB browser. The following sections describe the set up procedures.
Please set your PC’s Ethernet port as follow:
 IP address: 192.168.1.XXX (e.g. 192.168.1.10)
 Netmask: 255.255.255.0